lwfromny

Need help with drawer pulls!

lwfromny
7 år sedan

I am remodeling a 1930s home and need to select drawer pulls for the kitchen. I really love the Restoration Hardware Aubrey pull (first photo below). I love the character of it, that it looks classic but not expected. However I do not like the idea of having four holes drilled per pull. I'm concerned that someday when I'm ready to refresh the look of the kitchen and I want to change the pulls, I will have a problem because the likelihood I will find replacements pulls needing four holes is slim to none. So I've been hunting high and low for a very similar pull with the normal two holes. The problem is everything else I see has less "presence" on the plates - the end plates of everything else I'm seeing are punier. Also on the Aubrey I like 90(ish) degree curvature of the handle. The others I see have a much less squared off curve. I'm finding lots of stuff that looks like the second photo, which bores me to tears. Does anyone out there know of a polished nickel or polished chrome pull that looks very similar to Aubrey but with two holes? I know I'm being particular, but the devil is in the details :). Thanks!


Kommentarer (22)

  • PRO
    Flo Mangan
    7 år sedan

    I have found a couple that might serve your needs. You will have to compromise a bit, but here they are:

    Amerock Allison 170CH Pull, Polished Chrome, 3" · Mer info
    This is very reasonably priced, although with chrome, you might have finish problems down the road. However, this is close to the shape you seek, but with a raised base for a 2 screw application.

  • PRO
    Flo Mangan
    7 år sedan


    Chrome Drawer Pulls, 3 3/4 in. · Mer info
    Similar but looks like 4 screws. I like this one better than the one you posted. If you have to do 4 screws, this one is more decorative and not so utilitarian. But you may want the utilitarian look?

  • PRO
    Flo Mangan
    7 år sedan


    Polished Nickel Drawer Pulls, 4 5/8" · Mer info
    Close again, but might be a little too modern?

  • PRO
    Flo Mangan
    7 år sedan

    I like the Amerock one best so far. Will keep a eye out.

  • lwfromny
    Författare
    7 år sedan

    Flo thank you for all the suggestions - lol I like the last one the best. So the one you like least I like best :). It IS a little modern looking but it's the closest to the RH pull - the squarish design is much more appealing to me than the more rounded. It's funny - as I'm looking at all these I'm realizing that I think one of the other reasons I like the RH is that I like the exposed screws. Maybe because it's just a hair industrial looking or something. At any rate thank you so much - if you see more that you think might work please share, and in the meantime I'll check out the last one.

  • Joy
    7 år sedan
    Could be pricey?
  • PRO
    Madden, Slick & Bontempo, Inc
    7 år sedan

    Here are a couple that I found on Build.com. They are available in multiple finishes and sizes. Granted, they don't have the exposed screw, but they do have a similar feel to them.

    Jeffrey Alexander MO6373-128PC · Mer info

    Rusticware 982CH · Mer info

  • PRO
    Flo Mangan
    7 år sedan
    My reason for my choice was because of what I thought you wanted! lol. There are good options. You might want to go to a local architectural antique supply place. I'll bet you could get close to what you want. Alternatively you could do a mix of pulls! Just depends on what overall look you are going for.
  • PRO
    JudyG Designs
    7 år sedan
    Ändrades senast: 7 år sedan
  • chiflipper
    7 år sedan

    http://www.kbhardware.com/Cabinet-Hardware_Cabinet-Pulls_Arch-Pulls/52-901-1775-0/list.aspx?bid=cat

    This site has a huge selection and it appears they might have a few to your liking. Personally, I like the Aubrey pull. Don't worry so much about "in the future", if you love them buy them.

    lwfromny thanked chiflipper
  • Joy
    7 år sedan
    I think this is what you want. https://www.knobs.co/artisan-suite-cabinet-pull-b622-3-ab/?gclid=CIXz49qW2dACFYaGaQod6JoFqQ

    Artisan Suite Cabinet Pull in Chrome, 1 exposed screw, square shaped.
    lwfromny thanked Joy
  • Anne Duke
    7 år sedan
    Look at the LeeValley Hardware website. It takes a bit of persistence to navigate, but worth it in the end.
    lwfromny thanked Anne Duke
  • ycity
    7 år sedan
    I have the artisan pulls that Joy posted. They are great! I have them in satin nickel but didn't see that as an option in the link she posted.
    lwfromny thanked ycity
  • whocareswhoiam
    7 år sedan
    Ändrades senast: 7 år sedan

    Definitely go with your gut that tells you NOT to use the four screws - because you are right - it limits future change (unless you use a "fill" or a pull that covers the holes).

    lwfromny thanked whocareswhoiam
  • PRO
    Flo Mangan
    7 år sedan

    Just for info, chrome requires a fair amount of maintenance simply because little marks from water and hand prints collect and show. I am not saying don't do the chrome, but do know that brushed nickel is more forgiving in this regard. Hands in the kitchen inevitably are wet and sometimes greasy etc., so put that into your decision-making hopper!

    lwfromny thanked Flo Mangan
  • lwfromny
    Författare
    7 år sedan

    Flo is the same true for the polished nickle? I've never had nickle. I really want something polished vs brushed.

  • PRO
    S Mistry Interiors
    7 år sedan

    Oh but Chrome is sooooo pretty!

  • lwfromny
    Författare
    7 år sedan

    @ycity would you be willing to post a picture of the pulls that @Joy posted so I can see them? It's so hard to tell from a catalog what things will look like in real life. I like those the best so far but ouch - that price! Thank you @joy for the suggestion!

    Thank you SO MUCH to everyone else who had contributed so far - it is very generous of you to help and I see several options that are worth pursuing!

  • PRO
    Flo Mangan
    7 år sedan

    If you love the chrome -- go for it. Nickel is poor substitute.

  • Joy
    7 år sedan
    So playing around with the SKU number there is another pull likes this one. It sells for $11.70 per pull, but (there is always a but) it comes only in black, antique gold, or iron. SKU is Z622-3-AB. Type it into the search area of the last post that I made. Iron would be the one remotely close to what you want.
    lwfromny thanked Joy
  • PRO
    Knockout Knobs
    7 år sedan

    If you do not find what you are looking for, you can always custom design a pull to perfectly match your expectations and Knockout Knobs is the place to do it! We create custom 3-D printed knobs, pulls, and hooks to add to all of your cabinetry! You create a design and we create the product. All of our designs can be printed in a variety of metals and finishes. Look at our website to see if we have what you are looking for! Your Passion Your Design Your Hardware

    lwfromny thanked Knockout Knobs
Sponsored

Reload the page to not see this specific ad anymore

Sverige
Skräddarsy min upplevelse genom att använda cookies

Houzz använder cookies och liknande teknik för att anpassa min upplevelse med relevant innehåll och det bästa Houzz produkter och tjänster kan erbjuda mig. Genom att klicka 'Acceptera' accepterar jag detta, så som det vidare beskrivs i Houzz Cookie Policy. Jag kan avvisa icke-essentiella cookies genom att klicka 'Administrera preferenser'.